تخطي للذهاب إلى المحتوى
168 شارع التحرير، باب اللوق، القاهرة اتصل بنا
السابق التالي
Switches

Hikvision 16 Port Gigabit Smart POE Switch

الموديل DS-3E1518P-EI
كود المنتج: DS-3E1518P-EI

Hikvision 16 Port Gigabit Smart POE Switch

Hikvision 16 Port Gigabit Smart POE Switch (DS-3E1518P-EI) مناسب لمشروعات Switches التي تحتاج إلى مواصفات واضحة وتوافق عملي مع أنظمة المراقبة أو الشبكات أو التحكم في الدخول، مع دعم دو لينك في مصر.

https://dolinkegypt.com/web/image/product.template/1879/image_1920?unique=a188561

DS-3E1518P-EI



  • 16 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port
  • Total PoE power budget 230 W
  • Support IEEE 802.1Q VLAN tagging
  • Support energy saving mode with user-configurable plans
  • Support IEEE 802.3az Energy Efficient Ethernet (EEE) standard, saving power during periods of low data activity
  • Support STP/RSTP Loop prevention
  • Support cable detection to locate failure
  • Support DHCP snooping
  • Support 6 kV surge protection

7,995.00 LE 7995.0 EGP 7,995.00 LE

غير متاح للبيع

هذه التركيبة غير موجودة.

  • سويتشات الشبكات

الشروط والأحكام
ضمان إرجاع الأموال خلال 30 يوماً
الشحن: 2-3 أيام عمل

  • General
  • ShellMetal
  • Net Weight2.85 kg (6.28 lb)
  • Gross Weight3.05 kg (6.72 lb)
  • Dimensions (W × H × D)440.0 mm × 44.0 mm× 220.8 mm (17.32'' × 1.73'' × 8.69'')
  • Operating Temperature0 °C to 45 °C (32 °F to 113 °F)
  • Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
  • Operating Humidity5% to 95% (no condensation)
  • Relative Humidity5% to 95% (no condensation)
  • Power Supply100~240 V AC, 50/60 Hz, Max. 4 A
  • Installation ModeRack (equipped with mounting ears)
  • Max. Power Consumption250 W
  • Power Consumption in Idle20 W
  • Surge Protection6 KV
  • Network Parameters
  • Ports16 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port
  • MAC Address Table8 K
  • Switching Capacity56 Gbps
  • Packet Forwarding Rate41.66 Mpps
  • Internal Cache4.1 Mbits
  • Software Function
  • Long RangePorts 1 to 16: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • Port Isolation

    Ports 1 to 18: port isolation mode to improve network security

    Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

  • PoE WatchdogPorts 1 to 16: auto detect and restart the cameras that do not respond.
  • Link Aggregation

    Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.

    Support static link aggregation.

    Support 8 aggregation group(s).

  • QoS

    QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.

    Support port-based priority configuration.

    Support SP and WRR priority scheduling modes.

  • Loop Prevention

    Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.

    Support 802.1D STP.

    Support 802.1w RSTP.

  • VLAN

    VLAN is used for network scale planning and network health improvement.

    Support 802.1Q.

    Configurable VLAN ID from 1-4094.

    Support Trunk, Access port mode.

    Support Max. 32 VLAN.

  • HPP

    Support one-click activation and remote management via Hik-Partner Pro. Functions supported:

    1. Display the port rate.

    2. Display the port bandwidth utilization rate.

    3. Display topology information.

    4. Display the alarm status.

    5. Restart ports and devices.

    6. Remotely upgrade the device.

  • System Maintenance

    Support device management via web.

    Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.

    Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.

    Support remote management via Hik-Partner Pro.

    Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.

    Support 802.1ab LLDP for peer device discovery.

    Support port mirroring for fault locating.

  • DHCP SnoopingDHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.
  • PoE Power Supply
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • PoE Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
  • PoE PortPoE: Ports 1 to 16
  • Max. Port Power30 W
  • PoE Power Budget230 W
  • PoE Power SavingPower conservation is achieved by scheduling PoE to be enabled or disabled so that the PoE port(s) will cut off power to IPCs during idle periods.
  • Approval
  • EMCCE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017)
  • Safety

    CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition);

    CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)

  • ChemistryCE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No.1907/2006)
عام
الموديل DS-3E1518P-EI

هل تريد معرفة المزيد؟

تحدث مع مختص من Do Link لتحديد المواصفات المناسبة، والتكامل، والدعم الميداني.