Most small companies in Egypt start with a fingerprint clock, and most of them hit the same problem a few months later: staff whose fingerprints read badly, a technician who has to come and pull the records on a flash drive, and a manager who wants to lock the office door with the same device. The ZKTeco MB20 was built for exactly that stage. It reads faces and fingerprints, accepts a password, can take an RFID card as an option, talks to a PC over the network and can open one door lock.
What the MB20 actually does
According to ZKTeco's data, the MB20 offers four verification methods: fingerprint, face, RFID card and password. Identification takes less than one second, which matters at 9:00 in the morning when twenty people queue in front of the device. The card reader is optional and comes as 125kHz ID or 13.56MHz IC, so check which card type the client already uses before ordering.
The capacity figures are modest and honest for its class:
- Users: 1,000
- Fingerprints: 500 (optional 2,000)
- Faces: 200 (optional 500)
- Cards: 1,000
- Records: 50,000
On the connection side there is TCP/IP 10M/100M and a USB 2.0 host port. The screen is a 2.8" colour LCD with a stereo speaker. Standard functions include automatic status switch, self-service query, DST, T9 input, 9-digit user ID, scheduled bell and photo ID.
Access control on a single door
The MB20 has one relay and terminals for a lock, a door sensor and an exit button. In practice this means one device can record attendance and open the main office door, a clinic's staff entrance or a warehouse office. It is not a replacement for a multi-door access control panel; it controls one door.
Who the MB20 suits
Think of offices with up to a few hundred employees, clinics, schools' administration floors, showrooms and small factories where some workers have worn or dirty fingers. Face recognition helps a lot in workshops and kitchens, where fingerprint quality drops through the day. A useful rule: if more than a handful of your staff struggle with fingerprint clocks, a face-capable terminal saves you daily complaints and manual corrections.
Watch the face capacity, though. Standard is 200 faces (500 optional). If the company has 350 employees and all of them will use face, you need the higher option or a bigger model.
Setup notes from the field
- Power: the MB20 runs on DC 5V 0.8A. Use the supplied adapter and do not extend low-voltage DC over long cable runs. ZKTeco lists an optional 5V 1900mAh UPS with standby up to 3 hours, which is worth it in areas with frequent power cuts.
- Network: run a Cat6 cable to the device and give it a fixed IP address, so the attendance software always finds it. Avoid Wi-Fi bridges for a clock that the payroll depends on.
- Mounting and light: install it at a comfortable height for an average adult face, away from direct sunlight behind the person or a window in front of the camera. Strong backlight is the most common reason face enrollment fails.
- Enrollment: enroll faces in the same place the device is mounted, at the normal working light. Enroll two fingers per person as a backup.
- Software: the MB20 is listed as compatible with ZKBio Time.Net, ZKBio Time, ZKBio CVAccess (T&A module) and Zlink Assistant. Decide on the software before installation, because it defines how the HR team will pull reports.
- Lock wiring: when you use the relay for a door, choose a lock with its own suitable power supply, and add an exit button inside.
Need technical advice before you buy?
Do Link's sales team helps you choose the right equipment for your site and budget, with special wholesale and project pricing.
Contact the sales team WhatsApp Call us 01098280784 Request a quote
MB20 vs MB50 vs MB2000
All three are face and fingerprint terminals from ZKTeco. The MB50 is very close to the MB20 on paper, while the MB2000 moves up in capacity and access control interfaces. The table uses only the manufacturer figures listed on our product pages.
| Item | MB20 | MB50 | MB2000 |
|---|---|---|---|
| Verification | Face, fingerprint, password, optional card | Face, fingerprint, password, optional card | Face, fingerprint, RFID card |
| Face capacity | 200 (optional 500) | 200 | 2,000 |
| Fingerprint capacity | 500 (optional 2,000) | 500 (optional 2,000) | 3,000 |
| Card capacity | 1,000 | Not listed | 3,000 |
| Records | 50,000 | 50,000 | 100,000 |
| Communication | TCP/IP, USB host | TCP/IP, USB host | TCP/IP, USB host, optional Wi-Fi |
| Access control | 1 relay: lock, sensor, exit button | 1 relay: lock, sensor, exit button | Lock, door sensor, exit button, alarm |
| Backup power | Optional 5V 1900mAh UPS (up to 3 h) | Optional 5V 1900mAh UPS (up to 3 h) | Built-in battery |
| Power supply | DC 5V 0.8A | DC 5V 0.8A | DC 12V 1.5A |
| Screen | 2.8" colour LCD | 2.8" colour LCD | 2.8" TFT |
How to read the table
Choose between the MB20 and the MB50 based on availability and the client's preference; the published data does not show a meaningful functional gap between them. The MB50 description also mentions a separate MB50-VL variant with visible light face recognition, which is a different model.
Step up to the MB2000 when the headcount exceeds the MB20's face capacity, when you need a built-in battery, an alarm output or optional Wi-Fi, or when the site will collect more than 50,000 records between downloads. ZKTeco also notes that its BioID fingerprint reader stays stable under strong light and reads wet and rough fingers more precisely, which suits factories and outdoor gates under a canopy.
Common mistakes
- Ordering the device without the card option, then discovering the client already has 13.56MHz IC cards.
- Mounting the terminal facing the entrance glass, so every face is backlit in the morning.
- Connecting a magnetic lock to the relay without a separate power supply for the lock.
- Leaving the device on DHCP, then losing it from the software after a router restart.
- Enrolling faces only, with no backup fingerprint, so a staff member gets stuck when wearing sunglasses or a mask.
- Not agreeing on the report format with HR beforehand, so night-shift issues show up only after the first payroll.
You can browse other models in the ZKTeco time attendance category or on our ZKTeco page.
Buying through Do Link
Do Link is an authorized ZKTeco distributor in Egypt, supplying original devices with a one-year warranty and technical support before and after the sale. Dealers, contractors and companies get wholesale and project prices, and our engineers can design and install attendance and access control for larger sites. We deliver to all Egyptian governorates; for a quote, contact the sales team or WhatsApp 01098280784.
Recommended products from Do Link
Get a quote from Do Link
Send us your site details and the number of points you need, and Do Link's sales team will reply with suitable models and pricing. Or visit one of our three branches in Bab El Louk, Cairo.
Contact the sales team WhatsApp Call us 01098280784 Request a quote
About Do Link
Do Link for Security Systems is the official Platinum Distributor of Uniview in Egypt, and we supply Hikvision, Dahua, ZKTeco, TP-Link and other global brands for CCTV, networking, intercom and access control. Our products are original with a one-year warranty, pre- and post-sale technical support, and delivery to all Egyptian governorates.
Frequently asked questions
Does the ZKTeco MB20 work with cards?
Yes, as an option. The card reader comes as 125kHz ID or 13.56MHz IC, so confirm the card type you use before ordering. Card capacity is 1,000.
How many employees can use face recognition on the MB20?
The standard face capacity is 200, with an optional 500. The device supports 1,000 users in total.
Can the MB20 open a door?
Yes. It has one relay with connections for a lock, a door sensor and an exit button, so it can control a single door.
What happens when the power goes off?
ZKTeco lists an optional 5V 1900mAh UPS for the MB20 that gives standby of up to 3 hours. The MB2000 has a built-in battery.
Which software works with the MB20?
It is listed as compatible with ZKBio Time.Net, ZKBio Time, ZKBio CVAccess (T&A module) and Zlink Assistant.
When should I choose the MB2000 instead?
When you need more than 500 faces, more records (100,000), a built-in battery, an alarm output or optional Wi-Fi.