Skip to Content

Technical Specification: IP Telephony / IP PBX System

This specification covers an IP telephony system from the IP PBX, SIP trunks, E1 and FXS/FXO gateways and IP phones to call recording, network requirements, security, testing and handover. It is written for consultants, engineers and contractors to use in tender documents with light editing.

Vendor-neutral, no brand names. Review it against the code adopted for your project and fill in the values in [brackets].

PART 1 — GENERAL

1.1 Scope of Work

This section covers the supply, installation, configuration, testing and commissioning of a complete IP telephony system based on the Session Initiation Protocol (SIP) for [project name], including:

  • IP PBX (on-premise appliance or virtual machine) licensed for [number of extensions: 200], expandable to [500] by licence only.
  • SIP trunks and/or ISDN PRI (E1) gateway for [number of channels: 30] simultaneous external calls.
  • FXS gateways for [number] analog extensions and FXO gateways for [number] analog exchange lines.
  • IP phones: basic [number], executive [number] and operator consoles [number].
  • DECT or Wi-Fi phones [optional: number].
  • Call recording, voicemail, conferencing, call detail records and reporting.
  • Integration with intercom and door phones via SIP.
  • Configuration of the numbering plan, call flows and security; training, documentation and warranty.

The LAN, PoE switches and structured cabling are provided under other sections unless stated otherwise; the Contractor shall define the network requirements and verify them before installation.

1.2 Related Sections and Systems

  • Structured cabling system.
  • Data network (LAN switches, PoE, VLANs, wireless LAN).
  • UPS and electrical power.
  • Intercom and door entry system; public address (paging interface, where specified).
  • Services of the licensed telecom operator (SIP trunks, E1 lines, number ranges).

1.3 Reference Standards

StandardTitle
RFC 3261SIP: Session Initiation Protocol
RFC 3264An Offer/Answer Model with the Session Description Protocol (SDP)
RFC 3550RTP: A Transport Protocol for Real-Time Applications
RFC 3711The Secure Real-time Transport Protocol (SRTP)
RFC 4733RTP Payload for DTMF Digits, Telephony Tones, and Telephony Signals
RFC 5246 / RFC 8446The Transport Layer Security (TLS) Protocol Version 1.2 / Version 1.3
RFC 2474 / RFC 3246Differentiated Services Field (DS Field) / An Expedited Forwarding PHB
ITU-T G.711, G.722, G.729Speech codecs: PCM 64 kbit/s, wideband 7 kHz, CS-ACELP 8 kbit/s
ITU-T G.114One-way transmission time
ITU-T G.168Digital network echo cancellers
ITU-T G.703Physical/electrical characteristics of hierarchical digital interfaces
ITU-T Q.931ISDN user-network interface layer 3 specification for basic call control
ITU-T T.38Procedures for real-time Group 3 facsimile communication over IP networks
ITU-T H.264Advanced video coding for generic audiovisual services
ITU-T E.164The international public telecommunication numbering plan
IEEE 802.1QBridges and Bridged Networks (VLAN tagging and priority)
ANSI/TIA-1057Link Layer Discovery Protocol for Media Endpoint Devices (LLDP-MED)
IEEE 802.3af/atPower over Ethernet / Power over Ethernet Plus
IEEE 802.11Wireless LAN
ETSI EN 300 175Digital Enhanced Cordless Telecommunications (DECT); Common Interface
ANSI/TIA-568.2-DBalanced Twisted-Pair Telecommunications Cabling and Components Standard
ANSI/TIA-606Administration Standard for Telecommunications Infrastructure
IEC 62368-1Audio/video, information and communication technology equipment – Part 1: Safety requirements

The system shall also comply with the regulations of the Egyptian telecommunications regulator and the requirements of the licensed operator.

1.4 Definitions

  • IP PBX: the call control server that registers extensions and routes calls.
  • SIP trunk: external telephone lines delivered by the operator over IP.
  • PRI / E1: digital ISDN interface with 30 voice channels.
  • FXS: port that feeds an analog phone or fax. FXO: port that connects to an analog exchange line.
  • IVR / auto attendant: automatic voice menu that routes callers.
  • Hunt group: group of extensions that receives calls in a defined order.
  • CDR: call detail record. BLF: busy lamp field key. DID: direct inward dialling number.
  • QoS / DSCP: network prioritization of voice traffic using DiffServ code points.

1.5 Submittals

  • System architecture drawing showing the IP PBX, gateways, trunks, network and endpoints.
  • Datasheets with a clause-by-clause compliance statement.
  • Draft numbering plan, class of service matrix and IVR call flow diagrams.
  • Trunk dimensioning using Erlang B at a grade of service of [1%], based on [busy hour traffic].
  • Bandwidth calculation per codec and PoE budget per switch.
  • UPS load and autonomy calculation.
  • Security hardening plan.
  • Test procedures and test sheets, and as-built documents at handover.

1.6 Quality Assurance

  • Manufacturer: at least [5] years in IP telephony, ISO 9001 certified.
  • IP phones and gateways shall be tested by the manufacturer for interoperability with the offered IP PBX.
  • Authorized distributor in Egypt with local spare parts stock.
  • Contractor: authorized partner with at least [3] similar projects in the last [5] years and certified engineers.

1.7 Delivery, Storage and Handling

  • Deliver equipment in original sealed packaging; store in a dry, secure place.
  • Record MAC and serial numbers of all phones on delivery for provisioning and asset registers.

1.8 Warranty

  • [24 months] from provisional acceptance, covering parts, labour, software updates and any support subscription required by the manufacturer.
  • Response time: total system outage [4 hours]; other faults [next working day].
  • Spare parts available in Egypt for at least [5 years].

1.9 Spare Parts

  • IP phones: [3%] of each model, minimum one; power adapters: [5].
  • One analog gateway of each type, where gateways are used.

PART 2 — PRODUCTS

2.1 System Description and Architecture

The system shall be a SIP-based IP telephony system with centralized call control. All endpoints shall register to the IP PBX over a dedicated voice VLAN. External calls shall use SIP trunks and/or E1 gateways with automatic failover between them.

ItemMinimum capacity
Registered extensions[200], expandable to [500] by licence
Concurrent calls[60]
External channels[30] (SIP and/or E1)
Simultaneous recordings[all external calls]
Conference rooms[3] rooms of [10] participants
High availability[optional: active/standby with automatic failover]

2.2 IP PBX

  1. Platform: dedicated appliance with [dual power supplies] or a virtual machine on [the Employer's virtualization platform] at the manufacturer's recommended specification.
  2. Signalling: SIP to RFC 3261 over UDP, TCP and TLS; SDP offer/answer to RFC 3264.
  3. Codecs: G.711 A-law and µ-law, G.722 wideband; G.729 [optional]; transcoding where required.
  4. DTMF: RFC 4733 and SIP INFO. Fax over IP: ITU-T T.38.
  5. Web administration over HTTPS with role-based administrator accounts and an audit log.
  6. Automatic provisioning of phones (configuration, firmware, directory) over HTTPS.
  7. Voice prompts in Arabic and English; user portal in Arabic and English.
  8. Licences shall be perpetual for all extensions and features listed in this specification.

The following features shall be included:

  • IVR / auto attendant with multi-level menus, time conditions for working hours and holidays, and dial-by-extension.
  • Hunt groups (ring all, sequential, round robin) and call queues with announcements and music on hold.
  • Call transfer (attended and blind), hold, park and pickup, call forwarding, do not disturb, call waiting.
  • Caller ID presentation and caller ID-based routing.
  • Boss/secretary filtering, BLF and intercom/paging to phone groups.
  • Voicemail with message delivery to e-mail.
  • Conference bridge with PIN protection.
  • Class of service and least-cost routing across trunks.
  • Central phonebook and LDAP directory.
  • Softphone and mobile application licences [optional: number].

2.3 SIP Trunks and E1 (PRI) Gateway

  1. SIP trunks shall be compatible with the licensed operator's service, with [number] channels and DID ranges as allocated.
  2. E1 gateway: [1] E1 port(s) with 30 B-channels each, ISDN PRI with Q.931 signalling, G.703 120 ohm interface on RJ-48 connector.
  3. Echo cancellation to ITU-T G.168; clock synchronization from the operator network.
  4. Automatic failover between SIP trunks, E1 and analog lines; overflow routing when channels are busy.
  5. Trunk interfaces exposed to external networks shall provide session border controller functions: topology hiding, NAT traversal, call rate limiting and access lists.

2.4 FXS and FXO Gateways

  1. FXS ports for analog phones, fax machines and lift emergency phones, with caller ID and message waiting indication.
  2. FXO ports for analog exchange lines with disconnect supervision and caller ID detection.
  3. Support for T.38 fax relay and G.711 pass-through.
  4. Surge protection on all analog ports; 19-inch rack or wall mounting; input 220–240 V AC, 50 Hz.

2.5 IP Phones

FeatureBasicExecutiveOperator console
DisplayBacklit, at least [2.3 inch]Colour, at least [4.3 inch]Colour, with expansion modules
Line keysAt least [2]At least [6] programmableAt least [40] BLF keys or soft console
EthernetTwo ports, 10/100/1000 Mbit/sTwo ports, 10/100/1000 Mbit/sTwo ports, 10/100/1000 Mbit/s
HeadsetRJ9RJ9, USB or BluetoothRJ9 or USB
  1. All phones shall be powered by PoE to IEEE 802.3af; executive phones and phones with expansion modules may use IEEE 802.3at.
  2. HD voice: G.722 wideband; G.711 A-law/µ-law; G.729 [optional].
  3. Full-duplex speakerphone with acoustic echo cancellation.
  4. VLAN tagging to IEEE 802.1Q, automatic voice VLAN assignment by LLDP-MED (ANSI/TIA-1057), and DSCP marking.
  5. SIP over TLS and SRTP media encryption; 802.1X port authentication.
  6. Arabic and English menus; directory lookup from the central phonebook.
  7. Wall-mount kit for phones in corridors, kitchens and plant rooms.

2.6 DECT and Wi-Fi Phones (Optional)

  1. DECT: SIP DECT base stations to ETSI EN 300 175, multi-cell with seamless handover across [coverage area], encryption enabled.
  2. Wi-Fi phones: IEEE 802.11ac or later, WPA2/WPA3-Enterprise and fast roaming support on the wireless LAN.
  3. Handset talk time at least [10 hours] and standby at least [100 hours]; ruggedized IP65 handsets for [warehouses / plant areas].
  4. A radio site survey is required before installation and after commissioning.

2.7 Call Recording

  1. Recording of all or selected extensions and trunks, with on-demand recording by users with permission.
  2. Retention of [12 months] on internal or network storage; encrypted storage and access logging.
  3. Search by date, time, extension and number; playback and download controlled by user role.
  4. Announcement to callers that the call may be recorded, where required.

2.8 Call Detail Records and Reports

  1. CDRs for every call: date, time, source, destination, trunk, duration and disposition.
  2. Reports by extension, department and trunk, with scheduled export to PDF and CSV.
  3. Call cost estimation from a tariff table entered by the Employer.
  4. Alerts for abnormal call patterns, such as international calls outside working hours.

2.9 Intercom and Door Phone Integration

  1. SIP door stations shall register as extensions on the IP PBX and call [reception / security] hunt groups.
  2. Video-capable phones shall display video from door stations using ITU-T H.264.
  3. Door opening from the phone by DTMF code or soft key, configurable per door.
  4. Lift emergency phones shall connect by FXS or SIP with automatic dialling to [security].

2.10 Network Requirements

  1. Dedicated voice VLAN (IEEE 802.1Q) with automatic assignment to phones by LLDP-MED.
  2. QoS: voice media marked DSCP EF (46) to RFC 3246 and signalling marked CS3 (24), with priority queuing on all switches and WAN links.
  3. PoE switches to IEEE 802.3af/at with a PoE budget of at least [125%] of the connected phones.
  4. Network targets: one-way delay not exceeding 150 ms in line with ITU-T G.114, jitter not exceeding 30 ms and packet loss not exceeding 1%.
  5. Bandwidth per call on Ethernet, including headers at 20 ms packetization: approximately 87 kbit/s per direction for G.711 and G.722, and approximately 31 kbit/s for G.729.
  6. DHCP, DNS and NTP services available on the voice VLAN.

2.11 Power and UPS

  1. The IP PBX, gateways, core switches and PoE switches shall be on an online double-conversion UPS with autonomy of at least [30 minutes] at full load.
  2. Input 220–240 V AC, 50 Hz. Equipment shall comply with IEC 62368-1.

2.12 Security

  1. All default passwords shall be changed. Extension SIP passwords shall be random with at least [12] characters and different from extension numbers.
  2. Automatic blocking of IP addresses after repeated failed registration or login attempts.
  3. SIP trunk access restricted to the operator's IP addresses; no open SIP ports to the internet without a session border controller.
  4. Administration interfaces accessible only from the management network; remote users connect through VPN or a session border controller.
  5. SIP over TLS 1.2 or higher (RFC 5246 / RFC 8446) and SRTP (RFC 3711) wherever endpoints support them.
  6. International and premium-rate calls barred by class of service and enabled only with a personal PIN.
  7. Unused services disabled, firmware kept updated and configuration backups encrypted.

PART 3 — EXECUTION

3.1 Examination

  • Verify network readiness: voice VLAN, QoS, DHCP, PoE budget and tested cabling.
  • Confirm rack space, earthing, UPS and delivery of trunks and number ranges by the operator.
  • Report any deficiency to the Engineer in writing before starting work.

3.2 Installation

  • Mount the IP PBX appliance and gateways in the equipment rack and earth them according to the manufacturer's instructions.
  • Install phones at user locations; wall phones at [1,200–1,400 mm] above finished floor.
  • Connect analog ports through the main distribution frame with surge protection.

3.3 Cabling and Labelling

  • Category 6 U/UTP cabling to ANSI/TIA-568.2-D: permanent link not exceeding 90 m and channel not exceeding 100 m.
  • Label patch panels, outlets and cables at both ends to ANSI/TIA-606; phones labelled with extension number.

3.4 Configuration and Numbering Plan

The numbering plan below is a typical example to be finalized with the Employer:

RangeUse
[0]Operator / reception
[100–199]Management
[200–699]General extensions by department
[700–749]Hunt groups and queues
[750–799]Conference rooms and voicemail
[800–849]Door phones and lift phones
[9] + numberExternal line access
  • Public numbers shall follow the E.164 format on trunks.
  • Emergency numbers (122 police, 123 ambulance, 180 fire) shall be dialable from every phone, with and without the external access code, and never barred.
  • Classes of service: internal only, local, mobile, national and international (with PIN).
  • IVR and time conditions according to the approved call flow, with working hours [Sunday–Thursday, 08:00–17:00] and official holidays.

3.5 Testing and Commissioning

TestAcceptance criterion
Every extensionRegisters, makes and receives internal and external calls, transfer and BLF operate
TrunksAll channels loaded simultaneously; caller ID and DID routing correct
Trunk failoverCalls route to backup trunk when the primary fails
FXS/FXO and faxAnalog calls and T.38 fax successful
IVR, queues and time conditionsEvery menu branch and schedule works as approved
Recording, voicemail, conference, CDROperate as specified; CDRs match test calls
Voice quality under loadDSCP marking verified; mean opinion score at least [4.0] for G.711
Power failureUPS supports PBX and PoE phones for the specified time
Emergency numbers122, 123 and 180 reachable from sample phones in every class of service
SecurityDefault passwords changed; failed registrations blocked; international barring effective
Door phone integrationCalls, video and door opening work from designated phones

A soak period of [7 days] without critical failure is required before provisional acceptance.

3.6 Training

  • System administrators: [16 hours]; operators and receptionists: [4 hours]; end users: group sessions of [1 hour].
  • On-site training in Arabic, with quick reference guides in Arabic and English for each phone model.

3.7 Documentation and Handover

  • As-built drawings, final numbering plan, extension list with MAC addresses and IP plan.
  • Signed test sheets and commissioning report.
  • Configuration backups and licences registered in the Employer's name.
  • Administrator passwords handed over in sealed envelopes or by another secure method.
  • O&M manuals in Arabic and English, and warranty certificates.

Related tools and products

Frequently asked questions

Is an appliance-based or a virtual IP PBX better?

Both are accepted. An appliance is simpler to operate and suits sites without a virtualization platform, while a virtual PBX benefits from the Employer's existing backup and high-availability infrastructure. The choice is made in clause 2.2 according to the project infrastructure.

What is the difference between SIP trunks and E1 lines?

An E1 line is a 30-channel digital interface connected through a PRI gateway, while SIP trunks arrive over IP and can be expanded without hardware changes. The specification allows either or both, with automatic failover between them.

How much network bandwidth does one call use?

At 20 ms packetization a call uses approximately 87 kbit/s per direction on Ethernet with G.711 or G.722, and approximately 31 kbit/s with G.729. A bandwidth calculation is therefore required as a submittal.

How does the system protect against toll fraud?

Through long random SIP passwords, automatic IP blocking after failed attempts, trunk access limited to the operator's addresses, international calls barred by class of service and enabled only with a personal PIN, and alerts on abnormal call patterns.

Need help designing your project?

Do Link engineers help you choose equipment and work out quantities, and they design and execute CCTV, network, intercom and access control projects, with wholesale and project prices for contractors, technicians, companies and finishing companies.