Previous
Next
Uniview ISW5000-8GT4GP-POE-IN Harsh PoE Switch
Uniview ISW5000-8GT4GP-POE-IN Harsh PoE Switch is a Network Switch product. Review its technical specifications and product data to select the right solution from Do Link Egypt.
سويتش PoE صناعي من Uniview لتغذية وتوصيل كاميرات IP وأجهزة الشبكة في البيئات الصعبة.
- الـ PoE بيدعم معايير IEEE 802.3af/at وبيدي أقصى 30W لكل منفذ.
- مسافة نقل البيانات والتغذية حتى 100 متر.
- يدعم IEEE802.3x Flow control في Full-duplex و Backpressure في Half-duplex.
- لمبات اللوحة بتراقب حالة التشغيل وبتساعد في تحليل الأعطال.
- يدعم شبكة حلقية بضغطة واحدة ومنع العواصف بضغطة واحدة، باحتياطي واعتمادية عالية.
General
| Model | ISW5000-8GT4GP-POE-IN |
|---|
Key Features
- PoE supports IEEE 802.3af/at standards and provides a maximum output of 30W for each port.
- Data transmission and power supply distance up to 100 meters.
- Supports IEEE802.3x full-duplex flow control and Backpressure half-duplex flow control.
- Panel indicators monitor working status and assist in fault analysis.
- Supports one-click ring network and one-click storm suppression, featuring redundancy and high reliability.
- Highly reliable design, supporting traditional STP/MSTP/RSTP Layer 2 link protection technology.
- Support static convergence and dynamic convergence (LACP) 2 convergence modes, effectively increase the link bandwidth, improve the reliability of the link, and at the same time can achieve load balancing, link backup.
- Flexible and convenient management and maintenance Supports various management modes, such as Console, Telnet, and SSH.
Best Fit Applications
CCTV projects, factories, outdoor cabinets, parking areas and industrial sites.
Technical Specifications
| Model | ISW5000-8GT4GP-POE-IN |
| Hardware Specification | |
| Standards | IEEE802.3、IEEE802.3u、IEEE802.3z、IEEE802.3ab、IEEE802.3x、IEEE802.3af、IEEE802.3at |
| Ports Type | 8*10/100/1000Mbps RJ45 Ports4*1000Mbps SFP Slots |
| Switching capacity | 24Gbps |
| Jumbo Frame | 9KBytes |
| Forwarding performance | 17.86Mpps |
| MAC | 8K |
| Transfer Mode | Store-and-forward |
| Max.PoE Power | Max capacity: 120WMax capacity for single port: 30WMode A 1/2(-),3/6(+) |
| Dimensions (W×D×H) | 145*109*62.3mm |
| Operating Temperature | -30°C to 65 °C |
| Operating Humidity | 5% ~ 95% non-condensing |
| Storage Humidity | 0% ~ 95% non-condensing |
| Indicator | PWR, LNK/ACT |
| Electrostatic Standard | Contact ±6KV, Air ±8KV |
| Surge Protection | Differential mode ±2KV Common mode ±4KV |
| Power Supply | DC:48-57V, Adapter: AC100-240V, 50/60Hz |
| Software Specification | |
| MAC Address | MAC Aging TimeMAC FilterMAC Notification |
| Basic Management | Console/Telnet/SSHHttp/Https、SSL/TLSFTP/TFTPSyslogSNMP(v1/v2c/v3)、SNMP TrapSNTP/NTPCPU protectSoftware/Hardware watchdogFirmware Upgrade/BackupPing/Traceroute |
| Port Config | Bandwidth ControlFlow ControlEEEMTUCFM(802.1ag)EFM OAM(802.3ah)DDMStorm ControlPort IsolationPort SecurityVirtual Cable TestULDP |
| Discovery | LLDP(802.1ab)LLDP-MED |
| Link Aggregation | StaticLACP(802.3ad)Load Balance(src-mac/dst-mac/src-ip/dst-ip)Max groups and ports per group |
| VLAN | VLAN(802.1Q 4K)Access/Trunk/HybridPrivate VLANVLAN FilterMAC-based VLANProtocol-based VLANIP Subnet-based VLANVoice VLANGVRP/GMRPQinQ/Selective-QinQ/Flexible QinQVLAN Translation/N:1 VLAN TranslationGuest VLAN |
| Network Loop Detection | Loopback DetectionERPS |
| Spanning Tree | STP/RSTP/MSTPMSTP Support 64 instanceBPDU Guard/Root Guard/BPDU Tunnel |
| ARP | Static ARPARP Scanning PreventionARP Spoofing PreventionARP GuardGratuitous ARPDynamic ARP InspectionARP Quantity Control |
| ICMP | Anti ICMP AttackICMP Rate LimitICMP Unreachable Drop |
| IP Forward | Static RouteRoute Aggregation |
| Multicast VALN | Multicast VALN |
| IGMP | IGMP SNOOPING V1/V2/V3Fast LeaveIGMP Proxy |
| DHCP | DHCP ServerDHCPv4 Client/BOOTPDHCPv4 RelayDHCPv4 SnoopingDHCPv4 Option 82/43/60/61/67 |
| IPv6 Basic | IPv6 ND Snooping |
| DHCPv6 | DHCPv6 RelayDHCPv6 SnoopingIPv6 SAVISecurity RADHCPv6 Server |
| IPv6 Unicast Routing | Static Route |
| IPv6 Multicast Routing | MLD v1/V2 Snooping |
| IPv6 Features | SNMP over IPv6 SupportHTTP over IPv6 SupportSSH over IPv6 SupportDNS over IPv6 SupportIPv6 ping/traceroute SupportIPv6 Telnet SupportIPv6 Radius+ SupportIPv6 Tacacs+ SupportIPv6 SNTP/NTP SupportIPv6 FTP/TFTP SupportIPv6 IPSec SupportIPv6 ACL |
| Basic | Trust COS/DSCPTrust Port |
| Scheduling | SPWRRWDRR |
| PolicyMap Stream | Based on VLANBased on COS/DSCPAggregate PolicyMapIngress PolicyMap |
| Policing | CAR Stream Shaping(leak algorithm)Ingress Policing |
| Rewrite | COS/802.1p PriorityIP PrecedenceIPv4 DSCP/IPv6 DSCPdrop-precedenceinternal-priorityIngress/Egress Rewrite |
| Queuing | DSCP to DSCP mappingDSCP to DP mappingDSCP to Queue mappingCOS to DP mappingCOS to Queue mapping |
| IP-ACL | SIP/DIPIP ProtocolIP Priority(DSCP,TOS, Precedence)TCP,UDP src,dst Port |
| MAC-ACL | SRC/DST MACVLANCOSTag/Untag |
| IP-MAC ACL | MAC-ACL and IP-ACL |
| User-defined ACL | Base on user defined profile |
| ACL Features | Based on time period ACLACL on VLANBased on ACL Stream |
| 802.1x | Port Based AuthenticationSupport EAPoRMAC based AuthenticationGuest VLAN |
| MAB | Based on Port AuthenticationBased on MAC Authentication |
| MAC Address Count Limit | Based on PortBased on VLAN |
| IP Address Count Limit | Based on PortBased on VLAN |
| Access Management | Based on source mac and IP address |
| Deny DoS Attack | TCP FlagTCP FlagmentIP SegmentICMP |
| TACACS+ | Standard Support |
| Radius | Standard SupportClient, Support MD5 |
| SSL | Openssl 1.1.0 |
| MRPP | Compatiable ERRP |
| ULPP | Uplink Protection ProtocolSmart Link/Monitor Link |
| ULSM | Uplink State Monitor |
| Mirror | Support one to one, multi to onePort based mirror, support ingress, egress, and bothCPU based mirrorFlow based mirrorRSPAN |
| PoE Management | ON/OFF ConfigAlive Checking for PD7/24 On/Off Scheduling |
Need help choosing?
Want to learn more?
Talk to a Do Link specialist for sizing, integration and on-site support.